15454-O48E150.9

Green and environmentally friendly. Low price and budget friendly. And thats just the beginning of the benefits you get with Cisco Certified Refurbished 15454-O48E150.9 from Black Box Resale Services. Remanufactured to exacting standards in the Cisco state-of-the-art manufacturing facility, Cisco Certified Refurbished Equipment carries the same warranty as new equipment.

Cisco Part Number: 15454-O48E150.9-RF

Replaces Cisco Part Numbers: 15454-O48E150.9 and 15454-O48E150.9=

Condition	SKU	Description	List Price	Your Price
Certified Refurbished	JCIS15454O48E1509	OC48STM16 ELR 1550.92 100 GHz 1Ckt. SC	$6,793.00	Get Quote

Technical Specs

Networking - Status Indicators:	Link activity, link OK, status
General - Device Type:	Expansion module
Networking - Line Rate:	OC-48
Networking - Cabling Type:	Fiber optic
Environmental Parameters - Humidity Range Operating:	5 - 95%
Expansion / Connectivity - Compatible Slots:	1 x expansion slot
Networking - Line Coding Format:	NRZ
General - Depth:	9 in
General - Width:	0.7 in
Environmental Parameters - Min Operating Temperature:	32 °F
Environmental Parameters - Max Operating Temperature:	131 °F
Product - Marketing Text:	37 distinct OC-48 ITU 100 GHz dense wavelength division multiplexing (DWDM) cards provide the ONS 15454 DWDM channel plan. Each OC-48 DWDM card provides one Telcordia-compliant, GR-253 SONET OC-48 port. The port operates at 2.48 Gbps over a single-mode fiber span. The card carries VT, concatenated, and non-concatenated payloads at STS-1, STS-3c, STS-6c, STS-12c or STS-48c signal levels.You can install the OC-48 ELR DWDM cards in any high-speed slot and provision this card as part of a bi-directional line switched ring (BLSR) or unidirectional path switched ring (UPSR). The card can serve as either an access tributary or a transport span interface. The OC-48/STM-16 ELR 100 GHz card requires a cross-connect (XC) card or cross-connect virtual tributary (XCVT) card for proper operation.Each OC-48 ELR DWDM card uses extended long reach optics operating individually within the ITU-T 100 GHz grid. The OC-48 DWDM cards are intended to be used in applications with long unregenerated spans of up to 200 km (with mid-span amplification). These transmission distances are achieved through the use of inexpensive optical amplifiers (flat gain amplifiers) such as Cisco ONS 15216 erbium-doped fiber amplifiers (EDFAs).Maximum system reach in filterless applications is 26 dB without the use of optical amplifiers or regenerators. However, system reach also depends on the condition of the facilities, number of splices and connectors, and other performance-affecting factors. When used in combination with ONS 15216 100 GHz filters, a 2dB power penalty reduces the link budget to 24 dB. The OC-48 ELR DWDM cards feature wavelength stability of +/- 0.08 nm. Each interface contains a transmitter and receiver.The OC-48 ELR cards detect loss of signal (LOS), loss of frame (LOF), loss of pointer (LOP), and line-layer alarm indication signal (AIS-L) conditions. The cards also count section and line BIT errors.
General - Form Factor:	Plug-in module
General - Height:	12.6 in
Networking - Optical Wave Length:	1550.92 nm
Expansion / Connectivity - Interfaces:	1 x network - OC-48c/STM-16c - SC single mode x 2
Networking - Data Transfer Rate:	2488.32 Mbps
Networking - Connectivity Technology:	Wired
Networking - Data Link Protocol:	SONET/SDH
Product - Image File:	I01306